Felt, rubber and fibreglass coverings
Torch-on felt uses bonded layers with overlapping joints. EPDM is a rubber sheet with formed edges and joints. GRP is a fibreglass covering finished with a protective topcoat. We identify the material already on your roof before choosing the repair, because each covering needs compatible preparation and materials.
On felt we check open laps, splits and blistering. On rubber we check seams and the details at corners and outlets. With fibreglass we look for cracks and failed trim joints. We repair the damaged detail on a sound deck instead of covering it with an unrelated patch.
Where an extension meets the house
The covering turns up the wall at an upstand, with flashing protecting its top edge. If that junction opens, rain runs behind the roof surface and into your extension. We check both parts and renew the failed detail, so water stays outside the wall and drains onto the roof.
A flat roof still needs a fall towards its outlet or gutter. We clear blocked outlets and check the route water takes across the surface. During replacement, we assess the deck and falls before fitting the covering. That deals with the cause of standing water alongside the worn material.
Repairing or replacing the whole roof
We repair local splits and loose edges where the surrounding covering and deck are sound. Several overlapping patches, wet boards or a failing surface across the roof call for replacement. We strip the damaged layers, renew affected decking and finish the perimeter with the new covering.
Garage roofs, extensions and dormers need different access. A dormer sits among the main roof tiles, so we check those junctions too. The roof area, deck condition, drainage and access determine the work. You get a free written quote that covers the surface and the details around it.